Bad roads are a major irritant for both urban and rural dwellers nationwide. They are a major source of aggravation for grassroots communities across rural Ghana, whose chief complaint is that roads that are vital for carting agricultural produce to markets in urban areas, are often impossible to traverse for most vehicles because they are invariably in such a terrible state.
Yet, adopting the simple technology of adding melted plastic waste to bitumen, will enable our nation to build tolled plastic roads that could be a source of revenue for metropolitan, municipal and district assemblies, which enter public private partnerships (PPP) with road contractors, which borrow long-term funds from the insurance and pension industries for that purpose.
The advantage of plastic roads is that they last three times longer than conventional roads, remain pothole-free throughout their lifespan, bear heavier loads than ordinary roads, are never washed away by flash floods and require virtually no maintenance. The question is: in an era of extreme weather when flash floods are so frequent should we not opt to build plastic tolled roads across the Ghanaian countryside? What vehicle owner in farming communities across Ghana would object to paying toll fees if it will enable them travel on pothole-free roads all-year round?
To serve as inspiration for our ruling elites, today, we have culled a Guardian story by Sribala Subramanian, entitled: "Plastic roads: India’s radical plan to bury its garbage beneath the streets". We do hope our many young readers in particular will learn about the usefulness of plastic roads and demand that henceforth the authorities should adopt the technology and apply it across the nation as a solution to the persistent problem of pothole-riddled roads in our country.
Please read on:
"Guardian
Guardian sustainable business
Circular economy
Plastic roads: India’s radical plan to bury its garbage beneath the streets
In India, roads made from shredded plastic are proving a popular solution to tackling waste and extreme weather
Sribala Subramanian @bsubramQ
Thu 30 Jun 2016 12.00 BST
Last modified on Wed 27 Jul 2016 16.08 BST
Shares
1,398
Comments
8
Jambulingam Street, Chennai, India.
Jambulingam Street, Chennai, India. Photograph: Vittal Srinivas
Jambulingam Street, Chennai, is a local legend. The tar road in the bustling Nungambakkam area has weathered a major flood, several monsoons, recurring heat waves and a steady stream of cars, trucks and auto rickshaws without showing the usual signs of wear and tear. Built in 2002, it has not developed the mosaic of cracks, potholes or craters that typically make their appearance after it rains. Holding the road together is an unremarkable material: a cheap, polymer glue made from shredded waste plastic.
Can incineration and landfills save us from the recycling crisis?
Read more
Jambulingam Street was one of India’s first plastic roads . The environmentally conscious approach to road construction was developed in India around 15 years ago in response to the growing problem of plastic litter. As time wore on, polymer roads proved to be surprisingly durable, winning support among scientists and policymakers in India as well as neighboring countries like Bhutan. “The plastic tar roads have not developed any potholes, rutting, raveling or edge flaw, even though these roads are more than four years of age,” observed an early performance report by India’s Central Pollution Control Board. Today, there are more than 21,000 miles of plastic road in India, and roughly half are in the southern state of Tamil Nadu. Most are rural roads, but a small number have also been built in cities such as Chennai and Mumbai.
Adding flexible materials to strengthen tar roads is not a new idea. Commercially made polymer-modified asphalts first became popular in the 1970s in Europe. Now, North America claims 35% of the global market. Modified asphalts are made from virgin polymers and sometimes crumb rubber (ground tires). They are highly versatile: Illinois uses them to build high-traffic truck roads, Washington State uses them for noise reduction and in rural Ontario they are used to prevent roads from cracking after a harsh winter. Polymerized asphalts also tend not to buckle in extreme heat the way conventional roads do – plastic roads will not melt unless the temperature goes beyond 66C (150F), compared to 50.2C (122.5F) for ordinary roads – and are frequently used on roads in the Middle East.
But even in the US, cost is a significant barrier. The most widely used polymer, styrene-butadiene-styrene, can increase the price of a road by 30-50%. In India, high-stress roads like runways and expressways are increasingly using polymer modified asphalts made by manufacturers like DuPont.
While polymer roads in the US are made with asphalt that comes pre-mixed with a polymer, plastic tar roads are a frugal invention, made with a discarded, low-grade polymer. Every kilometer of this kind of road uses the equivalent of 1m plastic bags, saving around one tonne of asphalt and costing roughly 8% less than a conventional road. Dr R Vasudevan, a chemistry professor and dean at the Thiagarajar College of Engineering in Madurai, came up with the idea through trial and error, sprinkling shredded plastic waste over hot gravel and coating the stones in a thin film of plastic. He then added the plastic-coated stones to molten tar, or asphalt. Plastic and tar bond well together because both are petroleum products. The process was patented in 2006.
Dr R Vasudevan, a chemistry professor and dean at the Thiagarajar College of Engineering in Madurai.
Dr R Vasudevan, a chemistry professor and dean at the Thiagarajar College of Engineering in Madurai. Photograph: Sribala Subramanian
A modified version of the road which adds road scrap to plastic-coated gravel was tested out in March this year on a highway connecting Chennai with Villupuram. It was the first time plastic road technology was used for a national highway. It is expected to reduce construction costs by 50%.
Dr Vasudevan’s lab contains all the raw materials he needs to make a plastic road: shredders, a gas cylinder, a wok – and a pile of garbage. “This is my raw material,” Vasudevan says, pointing to a small pile of bags, plastic cups and foam packaging. These materials are the dregs of the plastic world, worthless even to rag pickers who cannot recycle them. Vasudevan melts shredded plastic over low heat to avoid emissions. Polystyrene is toxic when burned but, when softened, it makes an excellent pothole filler.
In India, plastic roads serve as a ready-made landfill for a certain kind of ubiquitous urban trash. Flimsy, single-use items like shopping bags and foam packaging are the ideal raw material. Impossible to recycle, they are a menace, hogging space in garbage dumps, clogging city drains and even poisoning the air. Delhi’s air, in particular, has been called a “toxic pollutant punchbowl” partly due to contaminants from plastic-fueled street bonfires.
However, urban plastic roads are still a rarity in India. Chennai was an early adopter of the technology, building its plastic roads from waste materials donated by the public. One satellite town even offered a gram of gold as an incentive for citizens to collect discarded plastic bags in 2012. But a year later, the plan was abandoned, because the city could not produce enough shredded plastic waste. It was also rumored that influential road builders, threatened by the prospect of pothole-free roads, had scuttled the project. Late last year, the mayor of Chennai announced the plastic road project was being revived, triggered in part by the devastation to Chennai’s roads after the floods of 2015.
Last November, the Indian government announced that plastic roads would be the default method of construction for most city streets, part of a multibillion-dollar overhaul of the country’s roads and highways. Urban areas with more than 500,000 people are now required to construct roads using waste plastic. The project even has the blessing of India’s prime minister, Narendra Modi, who has made “Swachh Bharat” (which translates to “Clean India”) a kind of personal crusade.
India’s road upgrade is long overdue. A recent road safety report by the World Health Organization (WHO) found that 17% of the world’s traffic fatalities occur in India, with crumbling roads partly responsible for the high death toll. In 2014, potholes alone caused more than 3000 deaths. According to the latest budget released by the Indian government, more roads projects were greenlit in 2015 than in previous years.
With so many projects underway, the Indian government is looking to a range of alternative materials to lower costs. The Delhi-Meerut Expressway, for example, which is currently under construction, may use unsegregated trash from one of the capital’s overflowing landfills to build its base and embankments. In an interview with the Times of India, India’s roads minister Nitin Gadkari said: “Delhi will get rid of these mounds and we will get the material for laying base with little expense.”
Gearing up: how Taipei's bike-sharing program is transforming citizens' commute
Read more
The reintroduction of plastics into the environment is not entirely without consequence. Old roads or poorly built ones are likely to shed plastic fragments into the soil and eventually waterways when they deteriorate as a result of photodegradation, which causes plastics to break down when exposed to environmental factors such as light and heat.
These minute plastic particles called microplastics act like magnets for pollutants like polychlorinated biphenyls (PCBs) and can have an impact on their surroundings. “Once in the soil, these particles may persist, accumulate, and eventually reach levels that can affect the functioning and biodiversity of the soil,” writes Matthias C Rillig, a professor of plant and soil ecology at Freie Universität Berlin.
In the short run, the bigger challenge for plastic roads is execution. They require a hefty dose of government intervention to succeed. Tamil Nadu was the first state in India to actively develop a cottage industry around shredded plastic. Most plastic shredders are women who buy subsidized shredding machines and sell their finished product for a small profit. Job creation for waste pickers and small entrepreneurs is an added benefit of the roads – a point not lost on India’s prime minister.
Since you’re here…
… we have a small favour to ask. More people are reading the Guardian than ever but advertising revenues across the media are falling fast. And unlike many news organisations, we haven’t put up a paywall – we want to keep our journalism as open as we can. So you can see why we need to ask for your help.
The Guardian’s independent, investigative journalism takes a lot of time, money and hard work to produce. Our investigative reporting uncovers unethical behaviour and social injustice, that helps to hold governments, companies and individuals to account. Through this we can, together, create meaningful change in the world. We do it because we believe our perspective matters – because it might well be your perspective, too.
I appreciate there not being a paywall: it is more democratic for the media to be available for all and not a commodity to be purchased by a few. I’m happy to make a contribution so others with less means still have access to information.
Thomasine, Sweden
If everyone who reads our reporting, who likes it, helps to support it, our future would be much more secure. For as little as $1, you can support the Guardian – and it only takes a minute. Thank you.
Support The Guardian
Paypal and credit card
Topics
Guardian sustainable business
Circular economy
Road transport
Plastics
features
Share on LinkedIn
Share on Pinterest
Share on Google+
comments (8)
Sign in or create your Guardian account to join the discussion.
Kavi Mazumdar
30 Jun 2016 15:47
2 3
Excellent article. I would have liked for there to be more than one paragraph on plans to use desegregated components of waste mountains to lay the base for a road. If you understand Hindi, please watch this excellent NDTV India interview with the man (DR Satish Chandra) leading the research team (Central Road Research Institute) for this :
http://www.ndtv.com/video/news/prime-time/delhi-meerut-expressway-road-made-from-garbages-421734?video-featured
Basically, they'll dry the garbage, segregate it based on age and components and use the organics/dirt/stones (60-70% of the garbage) to make the base for the road. Further, tying in with the article, they can use the plastics to help make the road. They can empty the entire landfill (35 metres high) and use it in the process of widening the highway.
An excellent initiative if successful and with Gadkari building roads everywhere, hopefully India's waste landfills will go down in number.
Share
Facebook
Twitter
Report
SenorSol Kavi Mazumdar
6 Jul 2016 15:21
0 1
Oh great, more roads, more cars, and more people with shite or non-existent driving skills causing carnage on India's roads!! Might go someway to explaining the appalling road fatality statistics in India!!
Share
Facebook
Twitter
Report
Sai Prashanth R
30 Jun 2016 15:49
2 3
I remember reading about that professor's experiment of the plastic roads a couple years back. Hope more roads contains plastic wastes in Chennai. Have to visit Jambulingam street at some point of time to see how the road is.
Share
Facebook
Twitter
Report
Most viewed
back to top
make a contribution
subscribe
securedrop
help
advertise with us
work for us
contact us
complaints & corrections
terms & conditions
privacy policy
cookie policy
digital newspaper archive
all topics
all contributors
Facebook
Twitter
© 2018 Guardian News and Media Limited or its affiliated companies. All rights reserved."
End of culled content from the website of The Guardian.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment